5. Finishing

Once a forged product has gone through the pressing process, trimming and other surface treatment operations are performed in order to improve the dimensional accuracy of the forged product. Surface treatment can be completed to enhance corrosion resistance and improve the appearance of the finished forged product.

/by

4. Cooling

By coordinating the cooling of the metal, forgers can increase the strength of the final product by deforming and optimizing the grain flow within the metal. A unique aspect of impression die forging is the “flash,” which is the excess metal that flows outside of the dies. The flash cools and hardens rapidly causing it to be stronger than the metal in the dies. This forces the metal in the dies to completely fill any cavities.

/by

3. Finish Forging

To complete the shape, the preformed metal is forced into an impression between two dies; this is where the metal takes on the general shape of the end product. Simple items may only need one press, but more complicated items may require multiple strokes at different pressures or even different dies to design the final product.

/by

2. Preforming

In order to form a piece of the ingot to be pressed between the closed dies, the heated ingot is edged and blocked with a press or hammer. Edging is done to increase the working cross section and blocking is implemented to refine the shape for finish forging.

/by

1. Heating

Pre-forged metal starts with metal blocks called “ingots,” which come in a variety of shapes and sizes depending on the part or component to be produced. These ingots are heated to a near molten state where the metal still retains its shape but can be altered easily with force.

/by

CONTACT US

If you need some assistance, have a question or even some feedback, choose one of the contact methods below and let us know how we can help.

  • Phone

    +86-574-13857859851

  • Address

    No 12 Hongxi Industry zone, Fenghua, Ningbo, China

Follow Us

© 2024 – NINGBO TIANHUI MACHINE CO., LTD.